Miele HS15 Operations Instructions download pdf (Page 45)

Downloaded from www.vandenborre.be

When to change the battery in the

radio-operated handle

Approx. every 18 months. One 3 V

battery (CR 2032) is required.

The vacuum cleaner can still be

used when the battery has run out or

if there is no battery fitted.

^

Switch the vacuum cleaner on using

the On/Off foot control s. The

Stand-by indicator - on the vacuum

cleaner will light up yellow.

^

Press the restart button on the

vacuum cleaner, see dia. 40.

The vacuum cleaner can continue to be

used, but only at maximum power.

How to change the battery in the

radio-operated handle (dia. 41)

^ Open the cover to the battery

compartment using a screwdriver.

^ Replace with a new battery, making

sure the polarity is correct.

^

Replace the cover.

^

Dispose of the old battery

responsibly.

When to change the thread lifters

The thread lifters on the suction inlet of

the floorhead can be replaced.

Check them from time to time and

replace them if the pile has worn down.

How to replace the thread lifters (dia.

42 + 43)

^

Use a suitable screwdriver to remove

the thread lifters from the slots.

^

Fit new thread lifters.

Upholstery nozzle SPD 10 (dia. 44)

^

Disengage the thread lifter unit at

each side of the upholstery nozzle

using a coin.

^

Fit a new thread lifter unit and lock

into position.

Cleaning the roller on the floorhead

(dia. 45)

(Not necessary for the AirTeQ floorhead)

a Release the bearing (with bayonet

fitting) using a coin.

b Press the bearing out, and remove it.

c Take out the roller.

^ Remove any threads and hair, replace

the roller and refit the bearing.

Replacement parts are available from

your Miele retailer or from Miele (see

back cover for contact details).

Cleaning and care

Warning: Always disconnect the

vacuum cleaner from the electrical

supply before cleaning it. Switch off

at the wall socket and unplug it.

Vacuum cleaner and accessories

External surfaces of the vacuum

cleaner and of the accessories can be

cleaned with a proprietary cleaner

suitable for plastic.

Warning: Do not use abrasive

cleaning agents, glass cleaning

agents, all-purpose cleaners or

oil-based conditioning agents.

en

45

1 ... 44 45 46 ... 124

Comments to this Manuals

No comments