Miele S185 User Manual download pdf (Page 8)

– 8 –

FILTER CARE

In addition to the dust bag, the vacuum cleaner

contains two filters; a central filter that protects

the motor (Fig.1) and a HEPA Filter, that removes

particles from the exhausted air (Fig. 2).

The HEPA Filter should be changed every six

months or whenever it becomes dirty. The central

filter should be changed or rinsed out whenever

the HEPA Filter is replaced.

CENTRAL FILTER (Fig. 1)

Part # F03M1000

To remove, slide the central filter forward out of this

housing.

IMPORTANT: If the central filter has been rinsed

out, make sure it is dry before re-installing it.

HEPA FILTER (Fig. 2)

Part # S02Z6000

To change the HEPA Filter, simply remove the

exhaust cover as shown and replace the filter.

IMPORTANT: Do not forget to re-install the

filters before use.

WALL - TO - WALL CLEANING

AUTOMATIC BEATER BAR STOP

AUTOMATIC CARPET HEIGHT ADJUSTMENT

WALL - TO - WALL CLEANING

AUTOMATIC BEATER

BAR STOP

AUTOMATIC CARPET

HEIGHT ADJUSTMENT

Fig. 1

REPLACING THE DUST BAG

1) Push the release

button on the dust

cover as shown, and

pull it forward.

2) Grip the handle

of the dust bag

and pull out.

3) Close dust bag

tab to avoid dust

leakage and put it

away.

We recommend the use of genuine Miele paper bags only; Part # 05294 741 Type Z

CAUTION: DISCONNECT THE CLEANER FROM THE OUTLET

BEFORE PERFORMING THE OPERATIONS BELOW

NOTE: If the dust bag is not installed correctly, the dust cover will not close.

5) Replace the dust

cover by inserting

the tab into the body

slot then push the

top of the cover into

place.

4) Install the new

dust bag by placing

the hole over the

exhaust port and

pressing it into

place as shown.

Fig. 2

1 2 3 4 5 6 7 8 9 ... 24

Comments to this Manuals

No comments

Miele S185 User Manual Page 8

Comments to this Manuals