Miele PW 5065 Service Manual download pdf (Page 7)

Technical safety

~

Before setting up the machine,

check it for any externally visible

damage.

Do not install or use a damaged

machine.

~

The electrical safety of this machine

can only be guaranteed when correctly

earthed. It is most important that this

basic safety requirement is observed

and regularly tested, and where there is

any doubt the on-site wiring system

should be inspected by a qualified

electrician. The manufacturer cannot be

held liable for the consequences of an

inadequate earthing system (e.g.

electric shock).

~

Unauthorised repairs could result in

unforeseen dangers for the user, for

which Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician. If

this is not done, any resultant damage

will not be covered by the guarantee.

Ensure current is not supplied to the

machine until after maintenance or

repair work has been carried out.

~

Do not make any alterations to the

machine, unless authorised to do so by

Miele.

~

In the event of a fault or for cleaning

purposes, the machine is only

completely isolated from the electricity

supply when:

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the isolator

switch, or

– it is switched off at the mains, or

– the mains fuse has been withdrawn,

or the screw-out fuse is removed (in

countries where this is applicable).

~

This machine must only be

connected to the on-site water supply

using a new hose kit. Old hoses must

not be re-used. Check the hose

regularly for signs of wear. Change in

good time to avoid the risk of leaks and

subsequent damage.

~

Faulty components must only be

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

~

Do not connect the machine to the

mains electricity supply by an extension

lead or a multi-socket unit. These do

not guarantee the required safety of the

machine (e.g. danger or overheating).

Warning and Safety instructions

7

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Comments to this Manuals

No comments