Miele W 1740 Operations Instructions download pdf (Page 24)

This machine has fully electronic

controls with automatic load

recognition. It takes in the right amount

of water required for the programme

depending on the amount of laundry

and its absorbency rate. This means

that programme cycles and durations

can vary.

The programme sequences outlined in

the chart are based on the basic

programme with a full load. Extra

options which can be selected have not

been taken into account.

The display shows the stage the

programme has reached.

Special features in the programme

sequences:

Anti-crease:

At the end of the programme, with the

exception of the Woollens programme,

the drum continues to turn at intervals

for up to 30 minutes to help prevent

creasing.

The door can be opened and laundry

removed at any time during the

anti-crease phase.

1)

A second rinse is carried out when a

temperature of 60°C to 95°C has

been selected. A third rinse is

carried out when a temperature

below 60°C is selected.

A third or fourth rinse is carried out if:

– there is too much foam in the drum

– a spin speed lower than 700 rpm has

been selected

– No u has been selected.

2)

A third rinse is carried out if:

No u has been selected.

3)

In the Outerwear programme,

laundry is only spun after the main

wash.

Programme sequence

24

Downloaded From WashingMachine-Manual.com Manuals

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 63 64

Comments to this Manuals

No comments