Miele KWT1611VI User Manual download pdf (Page 54)

^

Mark the distance X on the back-side

of the custom door.

^

Also calculate and mark the center of

the custom door Y.

^ Remove the mounting frame from the

appliance door and position it

according to the markings on the

custom door.

^ Pre-drill the holes.

^ Tightly screw on the bracket using

the pre-drilled holes:

Attach the bracket to each

attachment point with at least one

screw.

^

Attach the bracket at the top with at

least 5 screws:

The bracket includes a variety of holes

for the various design options of

custom doors.

When performing any work on the

custom door, always observe the

following:

–

Always select the best load-bearing

surface of the custom door as the

location for screws.

–

Select a screw length that is shorter

than the thickness of the door front.

Attaching and aligning the

custom door front

^

Fit the door handle to the custom

door.

Note that the screws are applied from

the reverse side.

^

Open the upper door and hang the

custom door with the adjusting rail

over the double-threaded bolts p.

^

Screw the nuts q a few turns onto

the double-threaded bolts. Do not

tighten completely.

^

Close the door.

Installation

54

1 ... 53 54 55 ... 64

Comments to this Manuals

No comments