Miele Coffee System Operations Instructions download pdf (Page 55)

Problem Possible cause and remedy

The coffee

machine does not

switch itself on,

although the

"Switch on at"

setting has been

activated for the

timer.

The system lock has been activated.

You need to deactivate the system lock (see "Settings -

System lock").

The machine was not used after being switched on

automatically three times in succession.

Switch the machine on and dispense a drink.

The display is

hard to see or not

able to be read.

The display brightness has been set too low.

Change this setting (see "Settings - Display brightness").

"Fill and replace

the water

container"

appears in the

display even

though the water

container is full

and in the

machine.

The water container is not in the correct position.

^ Remove the water container and replace it.

The water container was not correctly filled and replaced for

descaling.

^ Fill the water container to the descaling symbol F and

restart the descaling programme.

"Fill and replace

the water

container"

appears after

switching on even

though the

container is filled

and fitted in the

machine.

The appliance

does not rinse.

The coffee machine needs descaling.

Switch the machine off with the On/Off - sensor. Wait

approx. 1 hour.

Then switch the machine on again. As soon as "Heating-up

phase" appears in the display, touch x and select

"Descale the appliance".

Descale the coffee machine.

Neither milk nor

milk froth comes

out of the central

spout.

The milk pipework is blocked.

Clean the central spout, taking particular care to clean the

cappuccinatore and milk pipes carefully with the cleaning

brush.

Problem solving guide

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 71 72

Comments to this Manuals

No comments

Miele Coffee System Operations Instructions Page 55

Comments to this Manuals

Related products and manuals for Coffee making accessories Miele Coffee System