Operating and installation instructionsCooker hoodsDA 200-2, DA 200-2 EXT,DA 210-2, DA 210-2 EXT,DA 220-2, DA 220-2 EXTIt is essential to read theseop
DA 220-2, DA 220-2 EXTDescription of the appliance10
a Cover plateb Towerc Canopyd Grease filterse Hob lightingf Controlsg Main switchh Touch control for theHalogen lightingThis control can be used to sw
The cooker hood works with. . . air extraction:The air is drawn in and cleaned by thegrease filters and directed outside.The cooker hood is fitted wit
Main switchSwitch the main switch to "I". The fanand the lighting can now be operated.If the appliance is not going to be usedfor a longer p
To switch the fan off^Use the On/Off touch control toswitch the fan off.The indicator lamp for the control goesout.Switching the lighting onThe hob li
Filter operating hours counterThe number of hours the appliance hasbeen in operation for is stored in mem-ory.The indicator lamp for the grease filter
Altering the filter operating hourscounterThe operating hours counter for thegrease filters is set to 30 hours. Thistime can be lengthened or shortene
Before any cleaning or maintenancework the cooker hood must be dis-connected from the mains supply.Ensure that:– it is switched off at the fused spur
Grease filtersThe re-usable metal grease filters in theappliance remove solid particles fromthe kitchen vapours (grease, dust, etc)preventing soiling
^When removing the filters for clean-ing also clean off any residues of oilor fat from the now accessible hous-ing to prevent the risk of these catch-
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Warning and Safety instructions . . .
Changing a halogen lampDisconnect the cooker hood fromthe mains supply. Ensure that:– it is switched off at the fused spurconnection unit, or– the m
In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee please contact:–Your Miele Dealeror–The Miele Service
DA 200-2, DA 200-2 EXTa Drill holes for fixing to the ceiling with C 8 mm screwsb Alternative positions for feeding through the mains supply cablec Cu
DA 210-2, DA 210-2 EXTa Drill holes for fixing to the ceiling with C 8 mm screwsb Alternative positions for feeding through the mains supply cablec Cu
DA 220-2, DA 220-2 EXTa Drill holes for fixing to the ceiling with C 8 mm screwsb Alternative positions for feeding through the mains supply cablec Cu
Safety regulations prohibit the fittingof this cooker hood over a solid fuelstove.For safety reasons a minimum safedistance S must be maintained be-tw
Ceiling plate: DA 200-2, DA 200-2 EXTCeiling plate: DA 210-2 / 210-2 EXTCeiling plate: DA 220-2 / 220-2 EXT^Address the ceiling plate and posi-tion it
^If the cooker hood is to be connectedto an external fan motor, create thegap for the connection cable to thefan motor. Ensure that the diameter issuf
^ Prepare the ceiling plate for fitting. In-sert the two spring retainers from be-low into the slots provided in the ceil-ing plate.^ Pull the mains c
^ Assemble the tower. Place the flangeplate of the tower onto the ceilingplate in such a way that the springclips click into the slots securely.^Screw
Disposal of the packing materialThe transport and protective packinghas been selected from materials whichare environmentally friendly for disposaland
Danger of toxic fumes.Please heed the "Warning andSafety instructions" to avoid the dan-ger of toxic fumes.The cooker hood should be install
Important:If the exhaust ducting is to run throughrooms, ceiling space etc. where theremay be great variations in temperaturebetween the different are
All electrical work should be under-taken by a suitably qualified andcompetent person in strict accor-dance with national and local safetyregulations.
Rated loadDA 200-2, 210-2, 220-2 . . . . . . . 280 WLighting . . . . . . . . . . . . . . . . . . 4 x 20 WVoltageUK, IRL, NZ . . . . . . . . . . . . .
34
35
Alteration rights reserved / 1703This paper consists of cellulose which has been bleached without the use of chlorineM.-Nr. 05 814 390 / V01
This appliance conforms to currentsafety requirements. Incorrect usecan however lead to personal injuryand damage to the appliance.Before installation
The appliance is only completelyisolated from the electricity supplywhen:–it is switched off at the wall socketand the plug removed (do not pull onthe
InstallationThe minimum safety distance be-tween the top of the cooker / hoband the bottom of the cooker hoodshould be at least:–550 mm above electric
When using the cooker hood at thesame time as another heating ap-pliance which depends on the air in theroom (e.g. gas, oil or coal fired heaters,cont
DA 200-2, DA 200-2 EXTDescription of the appliance8
DA 210-2, DA 210-2 EXTDescription of the appliance9
Comments to this Manuals