Miele DA 396-5 Service Manual

Installation InstructionsDA398-5DA399-5 en-CA Installation, repair and maintenance work should be perf

The majority of the weight of theinstalled ventilation system will besupported by the lower retainingplate. It must be firmly attached tothe stud fram

Before installation read theinformation in the "Dimensions" and"Important Safety Instruction"chapters.Under certain conditions, th

Installation materialsInstallation28

a 3 protective shieldsto prevent scratches to the chimneyduring installation.b 1 vent collarfor use with 6" (150 mm) exhaustducting.c 1 reducing

,WARNINGTO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS,OBSERVE THE FOLLOWING:All electrical work should beperformed by a qualified ele

,WARNINGDanger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk of fire and topr

– If the exhaust is ducted into aninactive flue, the air must be expelledparallel to the flow direction of theflue.Never connect an exhaust hood toan

Total connected load...450Wfan motor ...350Wlighting ...2x50WPower supply voltage ... 120VFrequency ...

Alteration rights reserved / 1311INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOSTCURRENT PRODUCT SPECIFICATIONS, TECHN

READ AND SAVE THESEINSTRUCTIONSKeep these instructions in a safeplace and pass them on to any futureuser.Read these instructions carefullybefore insta

~d) Before connecting the applianceto the power supply make sure that thevoltage and frequency listed on thedata plate correspond with thehousehold el

,WARNINGTO REDUCE THE RISK OFINJURY TO PERSONS IN THEEVENT OF A COOKTOPGREASE FIRE, OBSERVE THEFOLLOWING*:~a) SMOTHER FLAMES with a closefitting lid,

Installation,WARNINGTO REDUCE THE RISK OFFIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS,OBSERVE THE FOLLOWING:~a) Installation work and electricalwiring mu

Drawing is not to scale.Appliance dimensions22

a Ar extraction modeb Recirculation modec Recirculation vent positioned at thetop (recirculation mode only)d, e Installation area;For recirculation mo

Distance between cooktop and hood (S)Do not install this exhaust hood over cooktops burning solid fuel.Provided a larger distance is not given by the

Drilling diagramTo prepare a backing plate, thespacings for the 5 mm screws need tobe drilled as shown.* The dimension between the ceilingand the midd