Miele KM 404 User Manual download pdf (Page 10)

Turning on and off

The control knobs are used to turn the

burners on and to regulate the strength

of the flames.

ß Cooktop is turned off

& Highest flame

/ Lowest flame

Turning on

^ To turn on the burner, press the

control knob down and turn it

counterclockwise to the large flame

symbol. The ignitor will click and

ignite the gas.

^

When the flame appears, keep the

control knob pressed in for

8-10 seconds to allow the Ignition

Safety Control to reach operating

temperature and release it.

If the flame goes out, repeat the above

procedure, keeping the control knob

pressed in for a few extra seconds.

^

Adjust the knob to the desired

setting.

Since the outer portion of the flame is

much hotter than the center, the flame

should be set so that its tips do not

extend beyond the sides of the pan.

Flame tips which extend beyond the

sides of the pan are hazardous.

Turning off

^

Turn the knob clockwise to "ß".

This stops the flow of gas and turns off

the burner.

The knob must only be turned left to

turn the appliance on and right to

turn it off.

If the knob is turned:

- on without pressing it down first,

- clockwise past the 12 o’clock

position, or

- counterclockwise past the smallest

flame symbol,

parts of the cooktop may be

damaged. The manufacturer cannot

be held responsible these damages.

Using the cooktop

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Comments to this Manuals

No comments