Miele G 8072 Operations Instructions download pdf (Page 27)

^

Refit the siphon into the new cleaning

agent container.

^

Press [.

The heating up phase will begin.

The programme control X will light

up red. The boiler and tank will fill up

with water, and the water will heat up.

Control X will light up green when

the filling and heating phase is

complete. The dishwasher is ready

for the new brand of cleaning agent.

^

Use the machine as normal.

Venting the rinsing agent

dispensing system

Before using the machine for the first

time, or if the container has not been

replenished on time or has been

allowed to empty, the rinsing agent

dispensing system must be vented. To

do this:

^

Remove the siphon from the rinsing

agent container (red).

^

Fill the container with rinsing agent,

or exchange the empty container for

a full one.

^ Insert the siphon tube into the

container and securely tighten it.

^ Switch the dishwasher off by

pressing [.

^ Press and hold controls X and Ä

together, and at the same time switch

on the dishwasher by pressing [.

^ Press and hold control X, and at the

same time press Ä twice in

succession.

P10 will show in the } display.

^

Press and hold control Ä until the

dispenser is vented - the dispenser

will then run more quietly.

^

Press [ to exit from input mode and

switch the dishwasher off.

Venting and programming the dispensing system

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Comments to this Manuals

No comments