Miele DA2210 User Manual download pdf (Page 35)

,WARNING

TO REDUCE THE RISK OF

FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

All electrical work should be

performed by a qualified electrician

in strict accordance with national

regulations (for USA: ANSI-NFPA 70)

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Ensure that power to the appliance

is off while installation or repair work

is performed.

^ Verify that the voltage, load and

circuit rating information found on the

data plate (located behind the

grease filters), match the household

electrical supply before installing the

hood.

,

WARNING! In Canada, the

ventilation hood should be plugged

into a outlet which is not enclosed in

a cupboard, cabinet or similar

enclosure per the Canadian

Electrical Code.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or call Miele’s

Technical Service Department. See

back cover for contact information.

,WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Grounding Instructions

This appliance must be grounded. In

the event of an electrical short circuit,

grounding reduces the risk of electric

shock by providing a path of least

resistance. This appliance is equipped

with a cord having a grounding wire

with a grounding plug. The plug must

be plugged into an outlet that is

properly installed and grounded.

WARNING - Improper grounding can

result in a risk of electric shock.

If there is any doubt, have the electrical

system of the house checked by a

qualified electrician.

Do not use an extension cord. If the

power supply cord is too short, have a

qualified electrician install an outlet

near the appliance.

Important

The hood comes equipped witha4ft

(1.2 m) power cord with a NEMA 5-15

molded plug for connection to a

120 VAC, 60 Hz, 15 A power outlet.

Electrical connection

35

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments