Miele KF 9757 iD Installation Manual download pdf (Page 14)

Before using for the first time

The stainless steel trim to the interior

shelves and the door shelves has a

layer of protective foil to prevent

scratching during transportation.

^

Do not remove this foil until the

appliance has been built in.

^

Treat the stainless steel surfaces with

a proprietary stainless steel

conditioner immediately after

removing the foil (available from the

Miele Spare Parts department or via

the internet on www.miele.co.uk).

Important! A stainless steel

conditioner gives long lasting

protection, and helps to prevent

resoiling.

^ Clean the inside of the appliance and

the accessories with warm water and

a little washing-up liquid, and then

dry with a soft cloth.

Important:

To ensure the correct functioning of

the appliance, let it stand for

between 1½ and 2 hours after

transporting it to its final location

before connecting it to the mains.

Switching on

The refrigerator section/PerfectFresh

zone and freezer section are switched

on together by pressing the master

switch on the right hand side of the

control panel.

^

Press the master switch on the right

hand side of the control panel.

The temperature display for the

refrigerator section lights up, and the

interior lighting comes on when the door

is opened.

Bars light up in the temperature display

for the freezer section.

The appliance starts cooling.

To enable the temperature to get

sufficiently cold inside the appliance,

allow the appliance to run for a few

hours before placing food in it.

Cool pack

Place the cool pack in the top freezer

drawer or, to save space, on the freezer

tray. The cool pack will be at its most

effective after it has been in the freezer

for approx. 24 hours.

Switching on and off

14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Comments to this Manuals

No comments