Miele KF 9757 iD User Manual download pdf (Page 48)

This appliance must be built in,

otherwise it could tip up.

Location

The appliance should be installed in a

dry well ventilated room. The room

temperature should not go above or

below the climate range for which the

appliance is designed. The higher the

ambient temperature of the room, the

more energy the appliance requires to

operate.

It should not be installed where it is

exposed to direct sunlight or directly

adjacent to a heat-producing appliance

such as an oven or a radiator.

Climate range

The appliance is designed for use

within certain climate ranges (ambient

temperatures) and should not be used

outside this range. The climate range of

the appliance is stated on the data

plate inside the appliance.

Climate range Ambient room

temperature

SN

N

ST

T

SN-ST

SN-T

+10°C to +32°C

+16°C to +32°C

+18°C to +38°C

+18°C to +43°C

+10°C to +38°C

+10°C to +43°C

Operating in a room which is too cold

will cause the cooling system to switch

off for too long, causing the internal

temperature in the appliance to rise

with the risk of food deteriorating and

going off or frozen food defrosting.

Ventilation

Air at the back of the appliance gets

warm. The appliance housing unit must

be constructed to allow sufficient space

for ventilation.

A ventilation gap of at least 38 mm

depth must be allowed for behind the

appliance for air to circulate.The air

inlet to the appliance is via the plinth in

the housing unit.

The cross-section of the air inlet and

outlet must be at least 200 cm

2

to

ensure that air can circulate without

hindrance. Otherwise the appliance has

to work harder, resulting in an increase

in electricity consumption.

The air inlet and outlet must not be

covered or blocked in any way.

They should be dusted on a regular

basis.

Installation

48

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Comments to this Manuals

No comments