Miele KF 9757 iD User Manual download pdf (Page 51)

Before building the appliance in, you

will need to decide on which side the

door is to be hinged. If left hand door

hinging is required, follow the

instructions below.

To change the door hinging, you will

need various sizes of Torx

screwdrivers, a slotted

screwdriver and a spanner.

Open both appliance doors.

Remove covers a, b and c and

caps d with a screwdriver.

Slightly loosen fixing screws e at the

top, middle and bottom of the

appliance.

Push each of the doors outwards and

take them off their hinges.

Unscrew fixing screws e completely,

and loosely screw them in at the top,

middle and bottom on the opposite

side of the appliance.

If you have put locking pins into the

hinges to stop the door opening too far:

Remove the locking pins from the top

of the hinges.

To remove the soft-close mechanism

^ Place the doors with the outer side

downwards on a stable surface.

Open the hinges, and loosen the

screw in mounting a.

Warning. The soft-close mechanism

snaps shut when dismantled.

Danger of injury.

Unscrew ball joint b using a

spanner, and remove soft-close

mechanism c together with the ball

joint.

Changing the door hinging

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 63 64

No comments

Miele KF 9757 iD User Manual Page 51