Miele 38376921USA Manual download pdf (Page 100)

Installing the appliance

^

Push the appliance into the niche

until all of the brackets are in line with

the front edge of the furniture side

wall.

–

n With 5/8" (16 mm) thick walls:

The spacers should touch the front

edge at the top and bottom of the

side walls of the housing unit.

–

o With 3/4" (19 mm) thick walls:

The front edges of the top and

bottom hinges should be flush with

the front edge of the housing side

walls.

^

Check the position of the fixing

bracket at the top and bottom front

edge of the cabinet side wall again.

This will help maintain a 1 5/8"

(42 mm) distance all the way around

from the front edges of the cabinet

side walls.

On cabinetry with door fittings (e.g.

stubs, seals etc.) the dimension of

these must be taken into account when

making sure there is a gap all round of

1 5/8" (42 mm).

^

Pull the appliance forward the

appropriate amount to suit the

installed dimensions.

The hinges and covers will now be

positioned to suit the dimensions.

Tip: Remove the door fittings. This will

ensure that the door is flush with the

surrounding kitchen unit cabinet doors.

^ p Align the appliance on both sides

by altering the adjustable feet using

the wrench supplied.

If the all round gap of 1 5/8" (42 mm)

is not maintained between the

appliance housing and the front

edge of the housing unit side wall,

the door may not shut properly.

This can cause ice to build up,

condensate to accumulate and lead

to faults in the appliance. These can

all lead to increased energy

consumption.

Installing the appliance

100

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 111 112

Comments to this Manuals

No comments