Miele 38376921USA Manual download pdf (Page 86)

To avoid tipping over, the appliance

must be properly installed and

secured.

WARNING!

Danger of tilting! To avoid a hazard

due to instability of the appliance, it

must be secured in accordance with

the instructions.

Installation location

This appliance should not be installed

where it is exposed to direct sunlight or

directly adjacent to a heat-producing

appliance such as an oven or a

radiator. The higher the ambient

temperature of the room, the longer the

compressor runs, and the more energy

the appliance requires to operate. The

appliance should be installed in a dry,

well ventilated room.

The following should also be taken into

consideration:

–

The plug must be easily accessible

and not concealed behind the

appliance so that the appliance can

quickly be disconnected from the

electricity supply in an emergency. In

addition, no other appliances should

be plugged into a socket located

directly behind this appliance.

–

The power cable must not come into

contact with the back of the

appliance, as they could be

damaged by vibrations from the

appliance. This may result in a short

circuit.

Important! In environments with

high humidity condensation can

build up on the appliance exterior

and ultimately cause corrosion on the

outer walls.

To prevent this from happening, we

recommend installing the appliance

in a dry and/or an air-conditioned

room with sufficient ventilation.

Once you have completed the

installation, please make sure that the

appliance doors close properly, that

the ventilation openings are not

covered and that the appliance has

been installed as described.

Climate class

The appliance is designed for use

within a certain climate range (ambient

temperatures) and should not be used

outside this range. The climate range of

the appliance is stated on the data

plate inside the appliance.

Climate

class

Room temperature

SN

N

ST

T

+50°F to +90°F (+10°C to +32°C)

+60°F to +90°F (+16°C to +32°C)

+60°F to +100°F (+16°C to +38°C)

+100°F to 110°F (+16°C to +43°C)

Operating in a room which is too cold

will cause the compressor to turn off for

too long, causing the internal

temperature in the appliance to rise

resulting in damage.

Installation information

86

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 111 112

Comments to this Manuals

No comments