Miele GAS KM 81-2 Operations Instructions download pdf (Page 12)

(AUS)(NZ) Gas connection

Connection to the gas supply, or

conversion from use on one type of

gas to another should only be

undertaken by an approved, who is

responsible for correct functioning

of the appliance when installed.

The gas cooktop is suitable for natural

gas and LPG.

: Check with your local Gas Supplier

.. for details about the type of gas and

calorific value from your Gas Board

I and compare this information with

I the type of gas quoted on the data

I plate.

For LPG consult your Miele-Dealer

or the service Department for the cor-

rect gas jet kit. Instructions for

con-

version to alternative forms of gas

can be found on pages 36-39.

The gas connection must be in-

stalled so that it can be connected

either from inside or outside the kit-

chen unit and the stop-valve must

be easily accessible and visible, by

opening one of the furniture doors,

if necessary.

The gas connection must be in accord-

ance with local and national regulations

and should be tested for possible leak-

age.

The appliance may only be connected

by a qualified gas fitter who is respon-

sible for correct functioning of the ap-

pliance when installed.

When the gas cooktop has been in-

stalled,

it is essential to check that

neither the gas pipe nor the mains

cable are in contact with hot parts

of the appliance, otherwise tempera-

ture damage to the pipe and the

cable could occur.

Nominal rating for all types of gas at

the high setting:

burner

gas type

rating

in MJ/h

small +

large

small +

large

small +

large

natural gas

LPG

(Propane)

LPG

(Propane/

Butane)

17.28

17.28

17.28

22

Appliance dimensions

KM 81-2

Dimensions in mm:

Dimensions in inches:

23

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Comments to this Manuals

No comments