Miele GAS KM 81-2 Operations Instructions

Miele Australia: Miele Australia Pty. Ltd., A.C.N. 005635398 1 Gilbert Park Drive, Knoxfield, VIC. 3180 Telephone: (03) 97647100, Fax: (03) 97647129 M

(CDN) (USA) Electrical connection The automatic ignition requires connec- Technical data CDN / USA tion to an a.c. single phase 120 V, T , . .„ ., . o

(CDN) (USA) Gas connection MmmmmmmmmmmmmMmmmmmmKmmmmmmmmmmmammmmmia This appliance must be installed with a separate shut-off valve and a gas pressure

(AUS)(NZ) Gas connection Connection to the gas supply, or conversion from use on one type of gas to another should only be undertaken by an approved,

Appliance dimensions Gas connection CDN/USA: T—1/ 3 I P-—MP-ISO 7-1 (DIN 2999) 30 (13/16") 1/2"-ISO 7-1 (DIN 2999) J 30'(13/1« Gas conn

(CDN) (USA) Instructions for building-in Prepare the cooktop cut-out as illus-trated. Dimension "B" applies for a combina-tion of appliances

(AUS)(^NZ) Clearance above and around the appliance Shown area indicates protected surface, which may be ceramic tiles or other approved material. If

(AUS)(NZ) Installation > This appliance shall be installed in I accordance with these instructions, I local gas fitting regulations, munici-I pal b

(AUS)(NZ) Instructions for building-in 2 zone Combiset 1 element 2 elements 3 elements 4 elements 5 elements 4 zone Combiset 1 elements 2 elements 3 e

(CDN)(USA) Conversion to alternative types of gas Changing the main jet, (does not apply to conversion to Natural Gas). Using a 10 and 13 mm wrench, l

(CDN) (USA) Conversion to • Screw the three screws into the burner base using a suitable philip-eshead screwdriver. • Put the large burner cap base, t

Description of the appliance KM 81-2 2 Description of the appliance KM 81-2 ©Trivet ® Wok/pan support ©Small burner cap 0 Large burner cap © Burner ri

(AUS)(^NZ) Conversion to alternative types of gas Changing the main jet, (does not apply to conversion to Natural Gas). Using a 10 mm socket spanner,

(AUS)(NZ) Conversion to alternative types of gas control panel -— Lower protective V^ casing Screw the three screws into the bur-ner base using a suit

Contents Description of the appliance 2 For your safety 5 Help protect our environment 6 Warning and Safety Instructions 7 Burner Burner control 11 In

Help protect our environment Disposal of packaging The transport and protective packing is mostly manufactured from the following re-usable materials:

Warning and Safety Instructions • Check that all the burners are cor-• rectly assembled before igniting the gas, otherwise the ignition could malfunct

Warning and Safety Instructions When using a cooker hood over the gas cooktop, ensure that any burners in use are always covered with a pan. Otherwise

Burner • Press in the control knob and turn counter-clockwise to the high setting (largest flame symbol). When the flame ignites, keep the button pres

Cleaning and care In the event of a pan boiling over, clean the burner and the cooktop surface im-mediately, to prevent the boiled over substance from

Problem solving guide - Repairs to the gas and electrical i components of this appliance must S only be carried out by a suitably 1 qualified person.