Miele H6560BP User Manual download pdf (Page 133)

,

Danger of injury.

All electrical work should be

undertaken by a suitably qualified

and competent person.

Installation, repairs and other work

by unqualified persons could be

dangerous. Miele cannot be held

liable for unauthorised work.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

Connection of this appliance to the

electricity supply must be made in

accordance with current safety

regulations (BS 7671 in the UK).

Connection of this appliance should be

made via a fused connection unit or a

suitable isolator and the on/off switch

should be easily accessible after the

appliance has been built in.

If the switch is not accessible after

installation (depending on country) an

additional means of disconnection must

be provided for all poles.

When switched off there must be an

all-pole contact gap of 3 mm in the

isolator switch (including switch, fuses

and relays according to EN 60335).

Connection data

The required connection data are given

on the data plate located on the oven

trim visible when the door is open.

Ensure that these match the mains

supply.

When contacting Miele, please quote

the following:

–

Model number

–

Serial number

–

Connection data

(voltage/frequency/maximum

connected load)

When replacing the cable supplied

with another cable or changing the

connection, only cable type

H05VV-F with a suitable

cross-sectional area (CSA) may be

used (available from Miele Spare

Parts).

Electrical connection

133

Oven

This oven is supplied with an approx.

1.7 m long 3-core cable for connection

to a 230 V, 50 Hz supply.

The wires in the mains lead are

coloured as follows:

Green/yellow = earth;

Blue = neutral;

Brown = live

WARNING, THIS APPLIANCE MUST

BE EARTHED

For extra safety it is advisable to protect

the appliance with a suitable residual

current device (RCD).

Maximum connected load: see data

plate.

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 147 148

Comments to this Manuals

No comments