Miele KM 5753 User Manual download pdf (Page 40)

Combi mode

The minute minder and automatic

switch-off functions can be used at the

same time.

If you have programmed in one or more

switch-off times, and would like to use

the minute minder as well:

Touch the m sensor repeatedly until the

minute minder indicator lamp flashes.

If you are using the minute minder, and

would like to programme in one or more

switch-off times as well:

Touch the m sensor repeatedly until the

indicator lamp flashes for the cooking

zone required.

Shortly after the last entry, the shortest

remaining time will come up in the

display. If you want to check on another

remaining time, touch the m sensor

until the relevant indicator lamp flashes.

Starting with the shortest remaining

time which is showing in the display, all

cooking zones that are in use and the

minute minder are selected clockwise.

Timer factory settings

The timer is set at the factory so that it

starts with 01 or 99 when the + or -

sensor is touched.

This setting can be adjusted so that the

time you last used appears in the

display when you press + or - (see

"Programming - P4.").

Example:

If P4., S1 has been programmed, and

the last time the minute minder was

used was for 5 minutes, 00 will appear

in the display when you switch on the

Timer; when you then touch + or -, the

display will change to 05.

You can still select any time you want,

even if you have adjusted the timer

default setting.

Timer

40

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 71 72

Comments to this Manuals

No comments