Miele KM 5773 User Manual download pdf (Page 16)

Calibrating the sensor

switches

Automatic calibration

To ensure trouble free operation, the

sensors

–

need to be recalibrated after

installation and each time the

electricity supply fails, e.g. after a

power cut.

The safety lock indicator lamp lights

up during automatic calibration, and

the hob cannot be switched on.

– adjust themselves constantly whilst

the hob is in use.

If automatic calibration is unsuccessful,

an A lights up in the cooking zone

display on the left and right at the front,

and an F lights up on the left at the

back. Numbers light up in the cooking

zone display on the right at the back

and in the Timer/Memory display.

If this happens, recalibration will have

to be carried out manually.

Manual calibration

^

Make sure that there is no direct light

(from the sun or from an artificial

source) falling onto the hob. The area

surrounding the hob must not be too

dark, nor should the relationship

between light and shade be

constantly changing.

^

Make sure that there is nothing

covering the sensors or the hob. Take

any pans off the hob and wipe away

any food deposits.

^

Interrupt the power supply to the hob

for approx. 1 minute.

Reconnect the hob to the electricity

supply. The electronic unit will reset the

sensitivity levels of the sensors.

If this does not solve the problem,

please call the Miele Service

department.

Before using for the first time

16

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments