Miele KM 5773 User Manual download pdf (Page 20)

Sensor switches

This hob is equipped with electronic

sensor switches which react to finger

contact.

To operate a cooking zone, touch the

relevant sensor switch. Each time you

touch a sensor switch, an audible tone

sounds.

Take care only to touch the middle of

the sensor required. Keep the

control panel clean, and do not

place anything on top of it. The

sensors may fail to react or they

could mistake the article or any dirt

for a fingertip contact, thereby

activating a function or even causing

the hob to switch off automatically

(see Safety switch-off.)

Never place hot pans on the sensor

switches. The electronic unit

underneath could get damaged.

Switching on

The hob must be switched on before

any of the zones can be used.

To switch the hob on:

^

Touch the ON/OFF sensor s.

0 appears in each of the cooking zone

displays. 00 appears in the

Timer/Memory display. If no further

entry is made, the hob will switch itself

off after a few seconds for safety

reasons.

To switch a cooking zone on:

^ Select a power level between 1 and

12 by touching the - or + sensor.

To select cooking with Auto heat-up,

press the - sensor first (see "Auto

heat-up"). To select cooking without

Auto heat-up, press the + sensor first.

If you wish to switch on another

cooking zone, and the 0 for that zone

has already gone out, simply press the

- or + briefly. The 0 will reappear and

you can select a power level (with or

without Auto heat-up).

Use

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Comments to this Manuals

No comments