Miele K 9552 iD Installation Manual Page 1

Operating and installation instructionsRefrigeratorwith Dynamic coolingK 9552 iD (-1)K 9752 iD (-1)To avoid the risk of accidents ordamage to the appl

~Do not use sharp edged objects to–remove frost and ice,–separate food which has becomefrozen.They will damage the evaporator,causing irreversible dam

Normal energyconsumptionIncreased energyconsumptionInstallation site In a ventilated room. In an enclosed, unventilated room.Protected from direct sun

Before using for the first timeThe stainless steel trim to the interiorshelves and the door shelves has alayer of protective foil to preventscratching

Activating or de-activating the safetylock^Press and hold the Super cool buttonpressed in for approx. 5 seconds.The Super cool indicator light flashes

It is very important to set the correcttemperature for storing food in theappliance. Micro-organisms will causefood which is not stored at the correct

If you have adjusted the temperature,wait for approx. 6 hours if theappliance is not very full and forapprox. 24 hours if the appliance isfull, before

^Press the Super cool button to savethe setting.^Press the On/Off button to come outof setting mode.If you do not do this, the electronics willswitch

Super coolThe Super cool function can be used torapidly reduce the temperature in therefrigerator section to its lowest setting(depending on the room

Switching off Dynamic cooling^Press the Dynamic cooling buttonm. The Dynamic cooling indicatorlight will go out.The fan automatically switches offwhen

Different storage zonesDue to the natural circulation of the airin the appliance, there are differenttemperature zones in the refrigerator.Cold, heavy

Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Caring for the environment. . . . .

Food which should not bestored in a refrigeratorNot all food is suitable for refrigeration,as some food is sensitive to cold.Cucumbers, for example, b

–Examples of fruit and vegetableswhich react strongly to the naturalgases given off by other types offruit and vegetables are:Kiwis, broccoli, caulifl

Moving the shelvesThe shelves can be adjusted accordingto the height of the food.^Raise the shelf, pull it forwardsslightly until the notch at the sid

Fruit and vegetable containerson telescopic runners(depending on model)The fruit and vegetable containers arepushed in and out on telescopicrunners, a

Universal container(depending on model)The universal container can be usedboth to store and serve food.It consists of a deep tray a and ashallow tray

The refrigerator defrosts automatically.Condensate and frost can build up onthe back wall of the refrigerator whilst itis in use. You do not need to r

Never use cleaning agentscontaining abrasive substancessuch as sand, soda, acids, chloridesor chemical solvents. "Non-abrasive"cleaning agen

^Clean stainless steel surfaces with asuitable non-abrasive stainless steelcleaning agent following themanufacturer’s instructions on thepackaging.^To

Repairs to electrical appliancesshould only be carried out by asuitably qualified and competentperson in strict accordance withcurrent local and natio

. . . the interior lighting is notworking.Has the refrigerator door been left openfor too long? The lighting switches itselfoff automatically after ap

After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Electrical connection. . . . . . . .

Normal noises What causes themBrrrrr... Humming noise made by the motor (compressor). This noise canget louder for brief periods when the motor is swi

In the event of a fault which you cannotcorrect yourself, or if the appliance isunder guarantee, please contact:–your Miele Dealeror–Miele(see back co

Electrical connection U.K.All electrical work should be carried outby a suitably qualified and competentperson in strict accordance with currentlocal

This appliance must be built in,otherwise it could tip up.LocationThis appliance should be installed in adry, well-ventilated room. It should not bein

Before installation^Before installation remove the coverstrip, sealing strip and otheraccessories from inside theappliance and from the external rearw

Stainless steel front(depending on model)If the old appliance had a different typeof hinging, or if you cannot or do notwish to reuse the old furnitur

Niche height (mm)AK 9552 iD (-1) 1397 - 1413K 9752 iD (-1) 1772 - 1788Building-in dimensions36

The door hinges are set ex-works toenable the door to be opened wide.However, if the opening angle of thedoor needs to be limited for any reason,the h

Before building the appliance in, youwill need to decide on which side thedoor is to be hinged. If left hand doorhinging is required, follow theinstru

^Unscrew mounting b and pullsoft-close mechanism c downwardsto remove it.^Undo ball joint d using a spannerand remove it.^ Stand the appliance door up

a Safety lock indicator lightb On/Off buttonc Refrigerator temperature displayd Temperature selector buttons(+ for warmer; – for colder)e Super cool b

^ Push the appliance door onto thepre-fitted screws, and then tightenthe screws.^ Replace covers a, b and c.^Replace the locking pins into the topof t

All fitting instructions given are for aright hand hinged appliance. If youhave converted the appliance to lefthand hinging you will need to adaptthes

Preparing the appliance^ Slide cover strip a into the holder inthe middle of the appliance asillustrated with the bumps facingdownwards. The bumps wil

^ Fit cover g onto fixing bracket h.^ Secure fixing bracket h to thebottom of the appliance with screwsi (M5 x 15).^ Carefully remove the protective f

On furniture with door fittings (e.g.stubs, seals etc) the dimension ofthese must be taken into account whenmaking sure there is a gap all round of42

^ Loosen screws b on the top andbottom fixing brackets c.^ Press fixing bracket c against theside wall and tighten screws b.^Attach fixing bracket c t

^ Using a pencil, lightly mark a linedown the centre of the inside of thefurniture door.^ Hang fixing bracket d with the fittingaids onto the inside o

Securing the appliance door to thefurniture door:^ Screw fixing bracket a into thepre-drilled holes in the appliancedoor using hexagonal screw b.Make

^ Replace all the covers.To make sure the appliance iscorrectly fitted:– The door must close properly.– The door must not touch the furniturecarcase.–

49

a Dynamic cooling fanb Bottle rack*c Adjustable shelvesd Condensate channel anddrain holee Fruit and vegetable containers *f Butter and cheese compart

50

51

Alteration rights reserved / 1310K 9552 iD (-1), K 9752 iD (-1)M.-Nr. 07 470 031 / 03

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and

This appliance complies with allrelevant legal safety requirements.Improper use of the appliance can,however, present a risk of bothpersonal injury an

Technical safety~Before setting up the appliance,check it for any externally visibledamage.Do not install and use a damagedappliance.~This appliance c

~Safe operation of the appliance isonly assured if it has been installed andconnected in accordance with theseoperating and installation instructions.