Miele S 570 series Operations Instructions download pdf (Page 8)

Using accessories

The socket on the vacuum cleaner

(depending on model) must only

be used for the Miele Electrobrush

specified for use with this appliance.

To avoid the risk of injury when

vacuuming with a Miele Electro- or

Turbobrush do not touch the rotating

roller brush.

It is not advisable to vacuum di

-

rectly with the handle, i.e. without

an accessory attached as the rim could

get damaged and you could hurt your

-

self on sharp edges. Danger of injury.

Miele vacuum cleaner bags are

disposable and intended to be

used only once. Do not attempt to

re-use. Blocked pores reduce the effi-

ciency of the cleaner.

Use only genuine Miele dustbags,

filters and accessories. This ensure

optimum performance of the vacuum

cleaner throughout its life.

Cleaning, maintenance and re

-

pairs

Always disconnect the vacuum

cleaner from the mains supply for

maintenance work and for cleaning.

Switch off at the wall socket and re

-

move the plug. Pull on the plug and not

the cable.

Do not let the vacuum cleaner get

wet. Clean only with a dry cloth or

slightly damp cloth when disconnected

from the mains supply. If moisture gets

into the appliance there is the risk of an

electric shock.

Repairs may only be carried out by

a suitably qualified and competent

person in accordance with national and

local safety regulations. Repairs and

other work by unqualified persons

could be dangerous.

If the cable is damaged it should

be replaced together with a com

-

plete cable rewind by a Miele service

technician.

Disposing of an old appliance

When disposing of an old appli

-

ance cut the cable off the appli-

ance as close to the cleaner as possi-

ble and cut the plug off. The plug cut

from the cord should be rendered use-

less and then disposed of and on no

account be inserted into any socket

elsewhere in the house (electric shock

hazard). See section "Disposal of your

old appliance" earlier in this booklet for

further advice.

The manufacturer cannot be held lia

-

ble for damage caused by non-com

-

pliance with these Warning and

Safety instructions.

Warning and Safety instructions

8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Comments to this Manuals

No comments