Miele G 7825 Operations Instructions download pdf (Page 16)

The door can only be opened if:

–

the electricity supply to the machine

is switched on,

–

the red (emergency cut out) master

switch is in the I-ON position,

–

the I-0 On-Off button is pressed in

and

–

a cleaning or disinfection programme

is not in progress.

The door on the clean side (G 7826)

can only be opened if:

– DESIN (disinfection) programmes

have been correctly completed,

– the door locking function is active

(see "Machine function/Door locking"

in the Programming Manual).

To open the door

Press the 5 door button, and holding

onto the door grip open the door.

Do not touch the heating

elements under the wide area filter

during or directly after the end of a

programme. You could burn

yourself. They remain hot for some

time after the programme has

finished.

If the boiler has been programmed

to BOILER READY, be particularly

careful of hot water and steam when

opening the door. Danger of burning

or scalding. The inlet to the wash

cabinet is located, as viewed from

the unclean side, underneath the

basket runner on the left hand side.

To close the door

^ Lift the door upwards and push until

it clicks shut.

Opening and closing the door

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

No comments

Miele G 7825 Operations Instructions Page 16