Miele W 3444 WPS Operations Instructions download pdf (Page 26)

Adding or removing laundry

after a programme has started

^

Press the

Door

button in until the

drum door springs open.

^

Add or remove items.

^

Close the door.

The programme will continue

automatically.

Please note:

Once a programme has started the

machine cannot recognise any

adjustment to the load.

For this reason, if laundry is added or

removed after the start of a programme,

the machine will always complete the

programme cycle assuming a full load

which can lead to an increase in the

time remaining for the programme

shown in the display.

The door cannot be opened, if:

–

the suds temperature is above 55°C.

–

the water is above a certain level.

–

the safety lock is activated.

–

the programme has reached the

Final spin

stage.

The

Locked

check light will come on if

the Door button is pressed when the

above conditions are present.

Safety lock

The safety lock prevents the machine

from being opened or the

programme cancelled during a wash

programme.

To activate the safety lock

^

After the start of a programme, press

the Start button for at least 4 seconds

until the

Locked

check light (lower

right on the control panel) comes on.

The safety lock is now activated.

The safety lock is deactivated

automatically at the end of the

programme.

To deactivate the safety lock

^ Press the

Start

button for at least 4

seconds until the

Locked

check light

(lower right on the control panel)

goes out.

Exception:

If the programme selector has been

moved and the

Anti-crease/Finish

indicator light is flashing in the

sequence display.

^

First, turn the programme selector

back to the programme chosen

previously. The

Anti-crease/Finish

indicator light will go out.

^

You can now deactivate the safety

lock.

Changing the programme sequence

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Comments to this Manuals

No comments