Miele W 820 Operations Instructions download pdf (Page 18)

Programmable functions

Additional programme functions can be

selected if required:

High water level (only in Cottons

rinses)

Where rinse results are particularly im-

portant.

5th Rinse for Cottons programme

For soft water areas (hardness range 1,

up to 135 mg/l).

In soft water areas a higher water level

can be selected in addition to a 5th

rinse if rinse results are not as good as

required.

Child-safety feature

The washing machine ignores any

changes after the first three minutes of

starting the programme, i.e. if the pro-

gramme selector switch is set to a dif-

ferent setting or an additional pro-

gramme is selected.

The “On” lamp flashes.

Once the programme selector switch is

turned back to its original position the

“On” lamp stops flashing.

To change a programme:

Turn the programme selector switch

to “Finish/Start”.

The programme sequence indicator

lamps start flashing in succession after

about 30 seconds. You can select a dif-

ferent programme as soon as only the

“On” light is lit up.

The three functions described

above can be programmed by the

Customer in four steps as shown on

pages 19-20.

There are however other functions

programmable after Step 2 which

are reserved for Miele Service En-

gineers. They are not for Customer

use, and are not activated as stand-

ard.

18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Comments to this Manuals

No comments