Miele CVA 4066 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Technical safety
~
Before installing the appliance,
check for externally visible damage.
Do not operate a damaged appliance.
~
Before connecting the appliance to
the electrical supply make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. If in doubt,
consult a qualified technician.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician. To guarantee the
electrical safety of this appliance,
continuity must exist between the
appliance and an effective grounding
system. It is imperative that this basic
safety requirement be met. If there is
any doubt, have the electrical system of
the house checked by a qualified
electrician.
~
The appliance must be properly
installed before operation to ensure that
no electrical components are
accessible. Ensure that power is not
supplied to the appliance while
installation work, repairs or
maintenance is performed.
~
Do not use an extension cord to
connect the appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance
(danger of overheating and open
ground circuit).
~
If the appliance is installed behind a
door front, use the appliance only when
the door front is open. Do not close the
door front when the appliance is in
operation.
~
Before service or maintenance
disconnect the power supply by either
removing the fuse, "tripping" the circuit
breaker or unplugging the unit.
~
This appliance is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
installation in these applications. Please
contact the Miele Technical Service
Department with specific requirements.
~
The unit is designed for a cold water
connection. Do not connect it to hot
water, it will get damaged.
~
The water supply must be
accessible after installation.
~
Do not damage or kink the cover of
the water intake hose.
~
The waterproof system will only work if:
it is installed correctly.
it is damaged, the machine
repaired or faulty parts replaced.
the water supply is shut off when
not using the coffee system for an
extended period of time,
e.g. vacationing.
~
Installation work and repairs must
only be performed by a trained
technician in accordance with national
and local safety regulations. Repairs
and other work by unauthorized
persons could be dangerous and may
void the warranty.
IMPORTANT SAFETY INSTRUCTIONS
5
Page view 4
1 2 3 4 5 6 ... 76

Comments to this Manuals

Joe Benitez 29 Sep 2024 | 19:24:19

Very useful to have these available