Miele CVA 4066 User Manual download pdf (Page 71)

Make sure that the power to the

machine is OFF before installing or

performing maintenance or repairs.

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous.

Verify that the voltage, load and circuit

rating information found on the data

plate match the household electrical

supply before installing the coffee

system.

Do not connect the appliance to a

power inverter or directly to power

produced outside of the normal

electrical grid (i.e. direct solar or wind

power source).

Direct connection to such power

sources can cause power surges and

tripped breakers when the appliance is

turned on, and could damage the

appliance.

Do not connect the appliance to energy

saving plugs or outlets. The reduction

of power to the appliance caused by

these devices will cause the appliance

to run hot and may damage it and/or

shorten its usable life.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or contact Miele’s

Technical Service Department. See

back page for contact information.

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Important

The coffee system comes equipped

witha6ft(1.8 m) power cord with a

NEMA 5-15P molded plug for

connection to a 120 V, 15 A, 60 Hz

power supply.

Electrical connection

71

1 ... 70 71 72 73 74 75 76

Comments to this Manuals

Joe Benitez 29 Sep 2024 | 19:24:19

Very useful to have these available