Miele CVA 6805 brws Brilliant White Plumbed Built-in Installation Manual download pdf (Page 54)

Cleaning the milk valve

You should clean the milk valve once a

week to ensure good quality milk froth.

^

Touch "Main menu" or the # sensor.

^

Touch "Maintenance" y.

^

Touch "Clean the main dispenser".

The main dispenser and the milk valve

move into the maintenance position.

Important! Before you confirm

"Leave maintenance position" with

"OK", you must remove the cleaning

brush. Otherwise, the coffee system

will be damaged.

^

Insert the brush into the milk valve.

Move the brush back and forth.

^

Touch "OK".

The milk valve will move into the stan

-

dard position and the milk pipework is

rinsed.

Sensor cover

The sensor cover for the cup protection

shut-off is located under the main

dispenser. If the automatic dispenser

adjustment sensors do not clearly

recognize a container, the cup

protection shut-off stops the main

dispenser.

Clean the sensor cover by hand only

as necessary using warm water and

liquid dish soap.

^ To remove, press and hold the

sensor cover between the dispenser

nozzles a. Then press the main

dispenser in from the sides at the

back b.

This releases the sensor cover.

^

To replace, insert both hooks at the

back and press the sensor cover

upwards.

Cleaning and care

54

1 ... 53 54 55 ... 96

Comments to this Manuals

No comments