Miele CVA 6805 brws Brilliant White Plumbed Built-in Installation Manual download pdf (Page 65)

Fault Possible cause and solution

Fault 73

"Check brew unit"

The brew unit cannot reset to the correct position or it is

clogged and the ground coffee cannot be processed.

See if you can remove the brew unit (see "Cleaning and

care – Brew unit").

If you can remove the brew unit, clean it (see "Cleaning

and care – Brew unit").

^ Push the coffee ejector of the brew unit into the standard

position (see illustration).

^ Reinsert the waste unit and the water container. Do not

insert the brew unit. Close the door and turn on the coffee

system using the On/Off sensor K.

The brew unit motor will automatically move to the correct

position.

When the message "Insert brew unit" is displayed, open the

door and reinsert all the parts into the coffee system. Close

the front door.

If you cannot remove the brew unit:

Touch the On/Off sensor K to turn off the coffee system.

Wait about 2 minutes and then turn the system back on.

Fault 227 - 230,

Fault 233

The automatic dispenser adjustment is malfunctioning.

To confirm the message, press OK.

The automatic dispenser adjustment will be deactivated

during beverage preparation as long as the system remains

turned on. You can still make beverages.

Frequently asked questions

1 ... 64 65 66 ... 96

No comments

Miele CVA 6805 brws Brilliant White Plumbed Built-in Installation Manual Page 65