Miele 09 968 280 Operations Instructions download pdf (Page 17)

Exhaust duct

46

WARNING: Danger of toxic fumes.

Gas cooking appliances release

carbon monoxide that can be

harmful or fatal if inhaled.

To reduce the risk of fire and to

properly e

xhaust air, the exhaust

gases extracted by the hood should

be vented outside of the building

only.

Do not vent exhaust air into spaces

within walls or ceilings or in attics,

cr

awl spaces or ga

rages.

To reduce the risk of fire, only use

metal ductwork.

Please read and follow the

"IMPORT

ANT SAFETY

INSTRUCTIONS" to reduce the risk

of personal injury. Follow all local

building codes when installing the

hood.

 Only use smooth p

ipes or flexible

duct hoses made from non-

flammable materials for exhaust

ductwork.

 To achieve the greatest possible air

e

xtraction with the lowest noise

levels, please note the following:

– The diameter of the exhaust duct

should not be less than 6" (150 mm).

– If flat exhaust ducts are used, the

cross section should not be smaller

than that of the exhaust connector.

– The exhaust duct should be as short

and straigh

t as possible.

– If elbows are needed, make sure they

have

a large radius.

– The exhaust duct itself must not be

kink

ed or compressed.

– Make sure that all connections are

secur

e and airtight.

Remember that any constriction of

the air

flow will reduce extraction

performance and increase operating

noise.

 If the e

xhaust duct is to be routed

thr

ough an outside wall, we

recommend installing a telescopic

wall vent or a rooftop vent (available

as an optional accessory).

 If the e

xhaust air is to be conducted

int

o a vent flue, the intake piece must

be aligned with the flow direction of

the flue.

 When installing the exhaust duct

horizontally, you must slope it away

from the source by at least 1 cm per

meter (³/₈" per 3 ¹/₄"). This ensures

that condensate cannot drain back

into the ventilation hood.

 If the exhaust duct is to be routed

thr

ough rooms, ceiling space etc., the

temperatures in these different areas

may differ greatly, which means that

the problem of condensation will

need to be addressed. The exhaust

duct will need to be insulated.

1 ... 16 17 18 ... 27

Comments to this Manuals

No comments