Miele DA249-3 Operations Instructions download pdf (Page 18)

^

Clean the grease filter

- by hand: use a scrub brush in

warm water with a mild detergent.

- in a dishwasher: place the filter in

the lower basket, making sure that

the spray arm is not blocked.

Depending on the detergent,

cleaning the grease filter in a

dishwasher may cause permanent

discoloration of the filter surface.

Performance of the filter will not be

affected by this discoloration.

^

After cleaning, the filter can be

placed on a towel to air dry.

^ For cleaning the decor cover

determine "Cleaning the casing".

^ While the filter is removed, clean any

dirt or grease from the filter casing to

prevent the risk of fire.

^

After returning the grease filter, press

the grease filter button for 3 seconds

to reset the timer.

The indicator light will go out.

^

If the grease filter is cleaned before

the timer has reached its maximum,

the grease filter button should be

pressed for 6 seconds to reset the

counter to zero.

Inserting the grease filter

^

Angle the grease filter into position

toward the front of the hood.

^ Once the front edge of the filter is in

place, push up the rear of the filter so

that both sides click into place.

Inserting the decor cover

^

Hook the decor cover on to the

latches on the rear panel of the

chimney. Push the cover up at the

front so that it clicks in place.

Cleaning and Care

18

1 ... 17 18 19 ... 36

Comments to this Manuals

No comments