Miele Ventilation Hood Service Manual download pdf (Page 48)

Electrical connection

48

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK, OR IN‐

JURY TO PERSONS, OBSERVE THE

FOLLOWING:

All electrical work should be per‐

formed by a qualified electrician in

strict acc

ordance with national regu‐

lations (for USA: ANSI-NFPA 70) and

local safety regulations. Installation,

repairs and other work by unqualified

persons could be dangerous.

Ensure that power to the appliance is

OFF whil

e installation or repair work

is performed.

Verify that the voltage, load and cir‐

cui

t rating information found on the

data plate (located behind the baffle

filters), match the household electri‐

cal supply before installing the hood.

Use only with ventilation hood cord-

connection kits that have been in‐

vestig

ated and found acceptable for

use with this model hood.

If there is any question concerning

the electrical connection of this ap‐

plian

ce to your power supply, please

consult a licensed electrician or call

Miele’s Technical Service Depart‐

ment.

WARNING: THIS APPLIANCE MUST

BE GROUNDED

Grounding Instructions

WARNING - Improper grounding can

r

esult in a risk of electric shock.

This appliance must be grounded. In

the even

t of an electrical short cir‐

cuit, grounding reduces the risk of

electric shock by providing a path of

least resistance.plug.

If there is any doubt, have the elec‐

trical system of the house checked

by a qualified electrician.

To increase security before the ma‐

chi

ne is installed, it is recommended

to install a protective switch(30mA).

 The

hood must be hard wired ac‐

cordingly:

Black/Red wire: connect to L1 (live)

White wire: connect to N (neutral)

Green wire: connect to GND (ground)

1 ... 47 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments