Miele G 2874 SCVi Operations Instructions download pdf (Page 45)

Checking the filters in the

wash cabinet

The filter combination in the base of the

wash cabinet retains coarse soil from

the suds solution, preventing it

accessing the circulation system and

re-entering the cabinet through the

spray arms.

This dishwasher must not be

used without all the filters in place.

Collection of coarse soil may cause the

filters to clog. The level of soiling and

time it takes before the filters need

cleaning will vary depending on use.

The message

Check filters will appear

in the display after every 40 programme

cycles (factory default setting).

You can set the interval for this

message to appear to between 30

and 60 programme cycles (see

"Settings menu

!, Check filters").

Check the filter combination.

Clean it, if necessary.

Then confirm the message with

OK.

The display will change to show the

main menu.

Cleaning the filters

Switch the dishwasher off.

^ Turn the handle anti-clockwise to

release the filter combination a.

^ Take the filter combination out b,

remove any coarse particles and

rinse the filter well under running

water. Use a nylon brush if

necessary.

Cleaning and care

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

No comments

Miele G 2874 SCVi Operations Instructions Page 45