Miele G 2874 SCVi Operations Instructions download pdf (Page 80)

External water softening

system

If your dishwasher is connected to an

external water softening system which

uses salt to reactivate, to achieve good

cleaning results you will still need to set

the water hardness level of the water

softening unit on the dishwasher to the

water hardness level of the water

supplied from the external water

softening system.

If you do not know what this is, then set

the value at 1.4 mmol/l (8 °d - German

scale).

^ Select the value which equates to the

water hardness level of the water

supplied by the external water

softening unit and confirm your

selection with

OK.

If you disconnect the dishwasher

from the external water softening

system, select the

Automatic option.

Rinse aid

You can adjust the rinse aid dosage for

best results.

The rinse aid dosage can be set from

approx. 0-6 ml.

The factory default setting is 3 ml.

If spots appear on crockery and

glassware:

–

Increase the rinse aid dosage.

If clouding or smearing appears on

crockery and glassware:

–

Decrease the rinse aid dosage.

^

Use

+/- to select the rinse aid dosage

you want and confirm with

OK.

Check filters

You can adjust the interval at which the

message to remind you to check the

filters appears.

You can set an interval of between 30

and 60 programme cycles.

The "Check filters" message is set at the

factory to appear after every 40

programme cycles.

^

Select the interval you want and

confirm this with

OK.

Adjust Sensor wash

You can adjust the Sensor wash

programme so that it will remove

stubborn soiling in a lightly soiled load.

^ Select

Yes and confirm with OK.

Settings menu !

80

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86 87 88

Comments to this Manuals

No comments