Miele G 5100 SCI Operations Instructions download pdf (Page 53)

Problem Possible cause Remedy

Dishes, cutlery and

glasses are not dry

or are flecked.

The amount of rinse aid may

be insufficient, or the rinse

aid reservoir empty.

Replenish the reservoir,

increase the dosage or

change the brand of rinse

aid (see "Before using for the

first time - Rinse aid").

Crockery was taken out of

the cabinet too soon.

Leave it in for longer. See

"Operation".

Combination products have

been used which have

impaired drying

performance.

Change your detergent, or

replenish the rinse aid (see

"Before using for the first

time - Rinse aid").

White residue is

visible on cutlery

and crockery,

clouding occurs

on glassware; film

can be wiped off.

Not enough rinse aid was

used.

Increase the dosage (see

"Before using for the first

time - Setting the rinse aid

dosage").

There is no salt in the salt

reservoir.

Fill the salt reservoir (see

"Before using for the first

time - Filling the salt

reservoir").

The salt reservoir cap has

not been screwed on

correctly.

Replace it, making sure that

it screws back on correctly.

An unsuitable combination

detergent has been used.

Change your detergent. Use

a standard liquid, tablet or

powder detergent, and fill

the salt and rinse aid

reservoirs in the dishwasher.

The water softener is

programmed to a setting

which is too low.

Select a higher water

softener setting (see "Water

softener").

Problem solving guide

53

1 ... 52 53 54 ... 68

Comments to this Manuals

No comments