Miele G 5100 SCI Operations Instructions download pdf (Page 56)

Cleaning the drain pump and

non-return valve

If the water has not been pumped away

at the end of a programme the drain

pump or the non-return valve might be

blocked. They are, however, easy to

clean.

^

Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

^

Take the filter combination out of the

wash cabinet (see "Cleaning and

care - Cleaning the filters in the wash

cabinet").

^ Scoop the water out of the cabinet

using a suitable container or utensil.

^

Press the catch for the non-return

valve inwards a.

^

Lift out the non-return valve b, and

rinse well under running water.

^

Remove all foreign objects from the

non-return valve.

The drain pump is situated under the

non-return valve (see arrow).

^ Remove all foreign objects from the

drain pump (watch out for glass or

bone splinters which are particularly

difficult to detect and could cause

injury). Turn the drain pump impeller

by hand to check that there are no

more obstructions. You will feel a little

resistance when you turn the

impeller.

^

Carefully replace the non-return valve

and secure it with the catch.

,

Ensure that the catch engages

correctly.

Be very careful not to damage

sensitive components when

cleaning the drain pump and the

non-return valve.

Maintenance

56

1 ... 55 56 57 ... 68

Comments to this Manuals

No comments