Before using for the first time
22
Filling the salt reservoir
Important! Before filling the salt res‐
er
voir with dishwasher salt for the
first time, you must fill it with approx.
2 qt (2 l) of water to enable the salt to
dissolve.
Once the dishwasher has been used
for the first time, ther
e is always suf‐
ficient water in the reservoir.
Remo
ve the lower basket and un‐
screw the salt reservoir cap.
Water will run out of the reservoir
when the ca
p is removed.
It should therefore only be removed
in
order to refill the salt reservoir.
Fi
ll the reservoir with approx. 2 qt (2 l)
of water (first use only).
Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 4 lbs (2 kg) of
salt depending on the brand used.
Cle
an any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
Immediat
ely after filling the salt reser‐
voir, run the
Express pr
ogram with
the
Short pr
ogram option selected
and without any dishware in the dish‐
washer to remove any traces of salt
from the cabinet.
Comments to this Manuals