Miele G 6505 SCi Installation Manual download pdf (Page 85)

Water connection

85

Drainage

– The machine comes equipped with a

built-

in non-return valve on the dis‐

charge side to prevent waste water

from flowing back into the dishwash‐

er.

– Take the drain line of the dishwasher

and attach the dr

ain line as high as

possible under the counter rim of the

kitchen sink before connecting the

end to the drain. The loop will serve

to prevent a backed up drain or large

volume of water in the sink from si‐

phoning back into the dishwasher.

– The dishwasher is supplied with ap‐

pr

ox. 5' 11" (1.5 m) of flexible drain

hose with an internal diameter of 7/8"

(22 mm).

– The drain hose can be extended us‐

ing

extensions and adapters. The

drainage length must not be longer

than 13' 1 1/2" (4 m) and the delivery

head must not exceed 3' 3 3/8"

(1 m).

– If the hose is to be directly fitted to

the dr

ainage outlet on site, use the

hose clip supplied (see installation di‐

agram).

– The hose can be directed to the left

or the right of the appliance.

– The on-site connector for the drain

ho

se can be adapted to different

widths of hose. If the connector pro‐

trudes too far into the drain hose, it

will need to be shortened. Otherwise

the drain hose may become blocked.

– The drain hose must not be short‐

ened.

 Mak

e sure that there are no

kinks in the hose, and that it is not

squashed or stretched.

After servicing the appliance, ensure

that the dr

ain does not leak.

Venting the drain

If the on-site drain connection is situat‐

ed lower than the guide path for the

bott

om basket rollers in the open door,

the drain must be vented. Otherwise a

siphoning effect during a program can

cause the appliance to empty itself of

water.

 To vent: open the dishwasher door

fully.

 P

ull the lower spray arm firmly up‐

wards to remove it.

 Cut off the t

op of the vent valve in the

wash cabinet.

1 ... 84 85 86 87 88 89 90 91 92

Comments to this Manuals

No comments