Miele G 803 User Manual download pdf (Page 19)

Filling the salt reservoir.

The salt reservoir should be filled be

-

fore the first use and whenever the

“Salt” indicator lights. Only use water

softener reactivation salt (1 - 4 mm

grain size), other salts may contain in

-

soluble additives which can impair the

water softener.

The salt reservoir holds approximately

2 lbs (1 kg) of salt.

Inadvertently filling the salt reser

-

voir with dishwashing detergent

will damage the water softener.

Make sure that only water soft-

ener reactivation salt of the

proper grain size is used.

To fill the salt reservoir:

^

Remove the lower basket.

^

Unscrew and remove the salt reser

-

voir cap.

Before adding salt for the first time,

fill the reservoir with approximately

1 quart (1 l) of water.

^

Place the funnel provided over the

salt reservoir.

^

Carefully fill with salt. As it is filled,

water will run out.

^

Clean any excess salt from the

threads of the reservoir opening.

^

Screw the cap on firmly.

If the dishwasher will not be used im

-

mediately after reactivation, run the

“Rinse & Hold“ program. This will re

-

move any traces of salt from inside the

wash cabinet.

Before using for the first time

19

1 ... 18 19 20 ... 60

Comments to this Manuals

No comments