Miele G 803 User Manual download pdf (Page 20)

Salt indicator.

When the salt reservoir is empty, the

“Salt-PC” indicator lights, indicating that

it needs to be refilled with reactivation

salt.

After the reservoir has been filled, the

water softener is automatically reacti-

vated the next time the dishwasher is

started. The “Softener” indicator will

light during this process.

Note:

If your water is very soft (below

4 gr/gal), the salt indicator light will

stay on. The reservoir should not be

filled with salt. The indicator will remain

lit and should be disregarded or

bypassed.

The “Salt-PC” indicator has also been

designed so that future program up

-

dates can be entered into the dish

-

washer. See “After Sales Service”.

Bypassing the Salt indicator.

In order to bypass the salt indicator

light, you will need a screwdriver and

needle nose pliers.

^

Remove the salt reservoir cap.

Looking into the salt reservoir, you will

see the top of the float chamber on the

right hand side

b.

^ Using a screwdriver, carefully pivot

the float chamber towards the center

of the reservoir.

^

Using the needle nose pliers, pull the

cap

c off of the float chamber, and

remove the float

d.

^

Replace the float chamber cap, push

the chamber back into its upright po

-

sition, and replace the salt reservoir

cap. The indicator should not light.

Before using for the first time

20

1 ... 19 20 21 ... 60

Comments to this Manuals

No comments