Miele KFN 8662 SD Operations Instructions download pdf (Page 41)

The appliance is supplied right hand

hinged. If left hand door hinging is

required, follow the instructions below.

Removing the door handles:

First the side section of the handle must

be removed:

^ Pull door handle a towards you. Side

section b slides back, creating a

gap d between side section b and

mounting plate c.

^

Place a suitable object (e.g. a spoon

handle) in gap d, and slowly lever

the handle towards the door.

Be careful not to let the "spoon

handle" slip, causing damage to the

appliance.

The side section b can now be

removed.

^

Pull side section b out of the guides

on the mounting plate.

^

Loosen the 4 screws (Torx 15) in the

mounting plate, and remove the

handle.

^

Remove the cover caps from the

opposite side, and fit them into the

empty holes.

Changing over the doors:

^

Open the lower door.

^ Use a screwdriver to lever plinth a

out, then pull it forwards and out.

^

Use a screwdriver to remove cover

b, then close the door.

^

Remove screw c completely.

^

Pull door support d together with

hinge pin e downwards, then tilt it

forwards and take it off.

^

Open the lower appliance door, move

it downwards and take it off.

^

With the upper door g closed, pull

hinge pin f downwards to remove it.

Changing the door hinging

41

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments