Miele KFN 8662 SD Operations Instructions download pdf (Page 43)

In the following illustration the lower

door is not shown in the closed

position to make it easier to see

what happens next.

^ Turn door support b around, pull

hinge pin a out, and refit on the

opposite side.

^

Fit both parts into hinge plate f. To

do this push hinge pin a through

hinge plate f into door support b.

Swing the door support in, push

upwards and re-assemble with screw

c.

^

Align the lower door with the

appliance housing using the long slot

in hinge plate f. Then tighten screw

c.

^

Refit plinth fascia d, pushing it firmly

into position.

^

With the lower door open, secure

cover e to the front of the plinth

fascia.

Refitting the handles:

Please make sure you follow the

instructions below carefully when

you refit the handle. The door seal

will be damaged if the handle is

fitted incorrectly.

^ Loosely attach the handle to the

opposite side of the door with the two

front screws b.

Mounting plate c must be positioned

on the side of the door so that when the

door is closed it is flush with the side of

the appliance.

If this is not the case,

^

Tighten both grub screws a with the

allen key provided until mounting

plate c lines up correctly.

^

Then tighten all 4 fixing screws b.

^

Slide the side section of the handle

d into the guides on the mounting

plate until it clicks into place.

Changing the door hinging

43

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments