Miele 27102850USA User Manual download pdf (Page 17)

Burner

Do not clean any parts of the burner

in a dishwasher.

The burner can be dismantled and

cleaned when cool.

Remove the burner parts and wash

them in a solution of warm water and

liquid dish soap. Dry them

thoroughly. Make sure that the flame

holes are clean and completely dry.

Wipe the burner base clean with a

damp cloth and then dry.

Gently wipe the ignitor and ignition

safety control with a slightly damp

cloth, and then wipe dry.

Do not let the ignitor get wet. If it

gets wet it will not spark.

^ After cleaning dry all surfaces with a

clean cloth.

Reassembling the burner

^ Place cover plate c over burner

base d so that the ignitor and the

ignition safety control extend through

their respective holes in the cover

plate. The cover plate must sit evenly

over the burner base.

Do not use a warped cover plate.

Place the burner base in position

above the cover plate making sure

that pins e slot into their respective

holes in the burner head b.

Place burner cap a in position.

Be careful not to mix up the parts.

Cleaning and care

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

No comments

Miele 27102850USA User Manual Page 17