Miele CS 1012-1 Installation Manual download pdf (Page 53)

Changing the jets

Disconnect the gas hob from the

mains electricity supply. Turn off the

gas supply.

To change the main jets

^ Remove the pan support, burner cap

n and burner head o.

^

Using an M7 socket spanner,

unscrew main jet s.

^

Change the main jet.

To change the small jets

The upper section of the appliance has

to be removed before the small jets can

be changed.

^

Remove burner cap n and burner

head o.

^

Pull the control knobs off.

^

Loosen screws t.

^

Carefully remove the upper section of

the appliance. When doing this make

sure you do not also pull out the light

unit for the display a located

underneath the upper section. To

release the unit, squeeze together

the two clamps b.

^

Using a small screwdriver, unscrew

small jet u in the gas fitting.

^

Pull out the jet with a pair of pliers.

^

Fit the correct jets securely (see jet

table).

^

Finally, secure the jets against

inadvertent loosening with sealing

wax.

Conversion to another type of gas

53

1 2 ... 48 49 50 51 52 53 54 55 56

Comments to this Manuals

No comments