Miele CS 1326 Y Installation Manual download pdf (Page 30)

All electrical work should be carried

out by a suitably qualified and

competent person in strict

accordance with current local and

national safety regulations (BS 7671

in the UK).

If the connection cable is damaged,

it must be replaced by a suitably

qualified electrician with a special

connection cable of type H 05 V V-F

(pvc insulated), available from Miele.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer

cannot be held liable for

unauthorised work.

Ensure power is not supplied to the

appliance until after installation or

repair work has been carried out.

The appliance must only be

operated when built-in. This is to

ensure that all electrical parts are

shielded. Live parts must not be

exposed.

Do not connect the appliance to the

mains electricity supply by an

extension lead. These do not

guarantee the required safety of the

appliance.

Please make sure that the connection

data quoted on the data plate match

the household mains supply.

Connection should be made via a fused

plug and switched socket or a double

pole fused spur connection unit, or a

suitable isolator (as appropriate) which

complies with national and local safety

regulations and the on/off switch should

be easily accessible after the appliance

has been built in.

If the switch is not accessible after

installation (depending on country) an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to install

a suitable residual current device

(RCD).

When switched off there must be an

all-pole contact gap of at least 3 mm in

the isolator switch (including switch,

fuses and relays).

Important U.K.

The appliance is supplied for

connection to a 230-240 V, 50 Hz

supply with a 3-core cable.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue = neutral

Brown = live

WARNING

THIS APPLIANCE MUST BE

EARTHED

Electrical connection

30

1 ... 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments