Miele H6400BM Operations Instructions download pdf (Page 127)

All electrical work should be carried out

by a suitably qualified and competent

Miele approved service technician in

strict accordance with current national

and local safety regulations (BS 7671 in

the UK).

This appliance is supplied with a mains

cable for connection to a 230 - 240 V,

50 Hz single phase supply.

The voltage and connected load are

given on the data plate situated at the

front of the oven interior. Please ensure

that these match the household mains

supply.

Connection should be made via a fused

connection unit or a suitable isolator,

which complies with national and local

safety regulations, and the on/off switch

should be easily accessible after the

appliance has been installed.

If the switch is not accessible after

installation (depending on country) an

additional means of disconnection must

be provided for all poles.

Switches with a minimum all-pole

contact gap of 3mm are suitable for

isolating the appliance. These include

circuit breakers, fuses and protective

devices.

For extra safety it is advisable to protect

the appliance with a suitable residual

current device (RCD). Please contact a

qualified electrician for advice.

If the cable is damaged a new cable

must be fitted by a Miele approved

service technician.

This appliance conforms with European

Standard EN 55011 as a Group 2,

Class B product. Group 2 appliances

use high frequency energy in the form

of electro-magnetic waves to create

heat in food. Class B is assigned to

appliances that are suitable for

domestic use.

Important UK

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue = neutral

Brown or black = live

WARNING

THIS APPLIANCE MUST BE

EARTHED

Electrical connection

127

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 135 136

Comments to this Manuals

No comments