Miele Paragon sensor Operations Instructions download pdf (Page 21)

The system lock prevents your

machine being used without your

knowledge.

It can be activated if wished.

The dryer's electronics are locked. The

dryer can still be switched on but a

programme cannot be started. The

Locked indicator light will flash if an

attempt is made to start a programme.

The door is not locked and can be

opened at any time.

To activate the lock

Before you begin, first ensure that

:

– The tumble dryer is switched off.

– The door is closed.

A Press the Anti-crease and Drying

level buttons at the same time and

hold them pressed in until you reach

step D below.

B Press the I-On/0-Off button in.

Wait until the indicator light for the

Start/Stop button starts flashing ...

C ... and then press the Low

temperature/Short/Cool air button

three times.

D Then release the Anti-crease and

Drying level buttons.

The Locked indicator light will flash.

The electronics have now been locked.

E Switch the dryer off with the I-On /

0-Off button.

To deactivate the lock

Before you begin, first ensure that

:

–

The tumble dryer is switched off.

–

The door is closed.

A Press the Anti-crease and Drying

level buttons at the same time and

hold them pressed in until you reach

step D below.

B Press in the I-On/0-Off button.

Wait until the indicator light for the

Start/Stop button starts flashing ...

C ... and then press the Low

temperature/Short/Cool air button

three times.

D Then release the Anti-crease and

Drying level buttons.

The Locked indicator light will go out.

The electronics are no longer locked.

E You can now use the dryer or switch

it off with the I-On/0-Off button.

Electronic system lock

21

1 ... 20 21 22 ... 52

Comments to this Manuals

No comments