Miele TKR 650 WP Operations Instructions download pdf (Page 23)

EcoFeedback

23

You can use the EcoFeedback sensor

t

o call up information about the energy

consumption of your dryer.

Touching the EcoFeedback

sensor will

call up two types of information:

– an estimate of the consumption

before the programme begins

– the energy consumption

during the

programme.

The EcoFeedback

sensor will light up

and information will appear in the

display.

Both will go out automatically a few

seconds later or alternatively they can

be confirmed with

OK.

At the end of the programme, before

openin

g the door, you can also call up

the following in the display:

– the energy consumption and

– the degree of soiling of the fluff filters

and the plinth filt

er (0 % = light, 50 %

= medium, 100 % = heavy).

Accumulating fluff and soiling will

cause the programme duration to

increase which in turn will increase

energy consumption.

1. Estimate

 Aft

er selecting a programme, touch

the

EcoFeedback sen

sor.

For a few seconds bars which indicate

the estimat

ed consumption will appear:

Energy

The more bars visible, the higher the

ener

gy consumption.

The estimate will vary depending on the

pr

ogramme and any options selected.

2. Actual consumption

 T

ouch the

EcoFeedback

sensor.

You can view the actual amount of

ener

gy used.

Example:

Energy 2.0 kWh

< 0.1 kWh will be displayed if the

ener

gy consumption is very low.

The consumption will vary depending

on the programme stage and residual

moisture present.

If the door is opened or the tumble

dr

yer has switched off automatically

at the end of the programme, the

data will revert to the estimated

consumption.

Total consumption setting

– shows consumption data for the

pr

ogramme which has just been run

and

– shows total energy consumption to

date.

See "Settings menu" for more detailed

information.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 87 88

Comments to this Manuals

No comments